-
-
Allen wrenches: 2.5mm ball head, 3.0mm, 2.5mm, 2.0mm, 1.5mm
-
Flathead screw driver
-
Wire cutters (optional, scissors can be used)
-
-
-
Frame pieces have stickers to identify them and help show orientation in screenshots.
-
Printed parts have numbering labels printed into them. The # is the part number and the letter is the Rev
-
-
-
Hint: Click on pictures to enlarge them
-
The guide flow is as follows: prepare parts step (pictures with cork background) followed by assembly steps for those parts. If an assembly was created in a previous step, it will not be shown in the prepare parts step.
-
-
-
Drop-in T nuts can be a little frustrating if you've never used them, so I created a video with a quick assembly tip.
-
-
Almost done!
Finish Line