-
-
XY Motor Mount 12A (1x)
-
XY Axes Motor (1x)
-
GT2 20T Pulley (1x)
-
M5x16 button head cap screw (2x)
-
M5 T Nut (2x)
-
M3x22 socket head screw (2x)
-
-
-
Attach GT2 20T pulley onto motor shaft so that one of the set screws lines up with flat side of the motor's D shaft.
-
Fasten M5x16 screws and M5 T nuts to XY motor mount 12A.
-
Assemble assemblies from last two parts using M3x22 screws.
-
-
-
XY Motor Mount 12A (1x)
-
XY Axes Motor (1x)
-
GT2 20T Pulley (1x)
-
M5x16 button head cap screw (2x)
-
M5 T Nut (2x)
-
M3x22 socket head screw (2x)
-
-
-
Attach GT2 20T pulley onto motor shaft so one of the set screws lines up with flat side of D shaft
-
Pay attention to pulley orientation. (it should be flipped compered to the left assembly
-
Fasten M5x16 screws and M5 T nuts to XY motor mount 12A
-
Assemble assemblies from last two steps using M3x22 screws
-
-
-
XY axes Motor assembly L (1x)
-
XY axes Motor assembly R (1x)
-
F9 (1x)
-
F10 (1x)
-
F3 (1x)
-
F4 (1x)
-
M5x25 flat head screw (4x)
-
-
-
Slide XY motor assembly L onto F9
-
Pay attention to stickers for oriantation
-
Slide XY motor assembly R onto F10
-
Roughly 20mm
-
Assemble top frame using M5x25 screws into pre tapped holes
-
F3 sticker should face down
-
front piece should say F4 not F9
-
Cancel: I did not complete this guide.
4 other people completed this guide.