Section 2.2: Firmware Set-Up

Written By: Leland Crowther (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

Flags

0

    • Click the link below find the firmware download on our website

    • Documentation Page

    • Download and save file

    Edit

  2. Edit

  3. Click "settings"

    • Click "settings"

    • Click "General"

    • Click "Upload File(s)"

    • Select the BareXY_Firmware.zip file you just downloaded. Open and install it

    • Tip: There is no need to unzip the file

    Edit

    • Your printer will now ask for a password when you try to connect to it. The default password is "password"

    • Continue to Section 3

    Edit
Finish Line

One other person completed this guide.

Author

with 1 other contributor

Leland Crowther

Member since: 06/25/2018

3,520 Reputation

17 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 122