-
-
E3D V6 Hotend (1x)
-
Bondtech BMG Extruder (1x)
-
Print Carriage Assembly (1x)
-
Extruder Motor (1x)
-
-
-
Thermister and heater cartridge are oriented different than E3D V6 Assembly guide
-
Correct orientation of theristor and heater cartridge
-
Use E3D's Assembly guide for the V6 Hotend.
-
-
Watch Bondtech's BMG Extruder Assembly guide.
-
-
Almost done!
Finish Line
Cancel: I did not complete this guide.
3 other people completed this guide.