-
-
Attach F6 to F3 with M5x25 screws
-
Attach F5's to F1 and F2 with M5x25 screws
-
Tip: Keep F5's Slightly loose for alignment later (lightly tighten and then loosen 1/4 turn
-
-
-
Power Supply Mount 4A (2x)
-
Power Supply (1x)
-
M5x10 button head cap screw (2x)
-
M5 Drop-In T Nut (2x)
-
M3x8 socket head screw (2x)
-
-
-
Loosely attach M5x10 screw and M5 droop-in T nut to power supply bracket.
-
Repeat the step above to create a second mounting bracket assembly.
-
Attach both power supply mounting brackets to the power supply using two M3x8 screws.
-
-
-
Power Supply Assembly (1x)
-
M5x10 button head cap screw (1x)
-
M5 Drop-In T Nut (1x)
-
-
-
Attach power supply base to frame using M5x10 screw and M5 drop-in T nut.
-
Tip: attach to base and then pivot into place
-
Attach the two power supply mounting brackets to frame upright with hardware attached in step 4
-
-
-
DuetWifi Enclosure 5A (1x)
-
M5X10 button head cap screw (3x)
-
M5 Drop-In T Nut (3x)
-
-
-
Prepare to mount DuetWifi Enclosure 5A by attaching M5x10 and M5 drop-in T nut.
-
Attach to frame
-
-
-
DuetWifi (1x)
-
DuetWifi Enclosure 6A (1x)
-
DuetWifi Enclosure 7A (1x)
-
M3x8 socket head screw (4x)
-
M3x40 socket head screw (4x)
-
M3 Nylock nut (8x)
-
-
-
Attach DuetWifi to DuetWifi Enclosure 6A using M3x8 screws and M3 Nylock nuts.
-
SD card slot and USB port should be facing away from power supply (as shown)
-
Mount assembly from last step to DuetWifi enclosure 5A using M3x40 screws and M3 Nylock nuts.
-
Snap in DuetWifi Enclosure 7A
-
Cancel: I did not complete this guide.
4 other people completed this guide.