Section 1.9: Applying PEI to Flexplate

Written By: Leland Crowther (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

Flags

0

  1. BuildTak FlexPlate 9" x 10" (1x)

    • BuildTak FlexPlate 9" x 10" (1x)

    • 9" x 9" PEI sheet with pre-applied 3M adhesive (1x)

    Edit

  2. Remove warning sticker and clean Buildtak Flexplate with rubbing alcohol Peel back corner on PEI sheet Peel back about a quarter of the sheet

    • Remove warning sticker and clean Buildtak Flexplate with rubbing alcohol

    • Peel back corner on PEI sheet

    • Peel back about a quarter of the sheet

    • Line up corners of PEI and Flexplate

    Edit

  3. Use a credit card to slowly work your way across PEI Do your best to avoid bubbles Do your best to avoid bubbles

    • Use a credit card to slowly work your way across PEI

    • Do your best to avoid bubbles

    Edit
Finish Line

Author

with 1 other contributor

Leland Crowther

Member since: 06/25/2018

3,520 Reputation

17 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 187